If you are considering having institution plantation shutters installed in your home, one of the options you'll want to think is how the shutters will be mounted to your windows. Most plantation shutters are institution made and can be mounted to your window a estimate of ways. Generally, though, there are two choices: Inside mount on hanging strips and covering mount to frames.
Shutter panels are typically not attached directly to a window with hinges but are instead attached to whether hanging strips or frames. Both supply a covering for the shutter panels to mount to and both block light gaps, preventing direct sunlight from escaping colse to the edges of panels. However, frame mounting commonly provides a more done appearance. Frames have come to be the most popular option for mounting shutters.
Plantation Shutter
Hanging strips
Hanging strips are narrow strips of wood, 1"x1" is a common size, attached to the right and left jamb of the window. Panels are attached to the hanging strip with a "L" shaped, wrap colse to hinges that suspends the shutter panel in front of the strips. When the panels are closed, the hanging strips are hardly visible.
Advantages:
o Close mount: Allow shutters to be mounted as close as possible to the window
o Flush mount: In windows with deep casings of more than 2," hanging strips allow shutters to be mounted flush with the trim
o Cost: Because they typically cover a smaller area than frame mounted shutters, shutters mounted on hanging strips can cost 5-10% less than frame mounted shutters
o Flexibility: Offers installers more flexibility for adjusting panels to fit windows that are not entirely square
Disadvantages:
o Appearance: The extensive appearance is not as done as frame mounted shutters
o Tilt-in windows: Hanging strips commonly prevents tilt in windows from being able to tilt in
Frames
Frames consist of a shallow box that wrap colse to shutter panels like a picture frame. They are typically mounted flat against the trim surrounding your windows. Frames come in a estimate of profiles for use on distinct types of trim. The most common frame is about 2" deep and 1" wide. Shutter panels are mounted directly to the frame.
Advantages:
o Appearance: Because the frame mounts directly to the trim, the extensive appearance is much more finished. With an accurate color match, the framed shutter should look like it was built as part of the window. Additional, there is itsybitsy exposed hardware. Only the narrow edge of the hinge is visible.
o Installation: Frame are far easier for an installer to mount on windows.
Disadvantages:
o Cost: Because they commonly cover a larger area, framed shutters can cost a bit more
o Protrusion: Frames protrude from windows ½" to 1" more than shutters on hanging strips.
Plantation Shutters - Mounting Options
RSS Feed (xml)
No comments:
Post a Comment